HK-1 Injector|Push Spoon Distance Adjustment

The oil in the cylinder will gradually consume out during the operation of the machine, resulting in the spoon not being pushed out to a sufficient distance. In order to maintain the high quality of the cigarettes, the spoon needs to be properly adjusted by adjusting screws.

Turning the adjustment screw one turn can extend or shorten the pushing distance of the spoon by 3.5mm. Clockwise rotation will extend, while counterclockwise rotation will shorten.

In the case of hydraulic oil loss, we extend the pushing distance of the push spoon by turning it clockwise.

After adjustment, switch to manual reset mode, press the lever to keep the spoon out, and check if it has been adjusted to the standard distance.

The standard distance is that the root of the spoon exceeds the nozzle by 2~4mm.

Note

Applicable to tobacco only. During the operation of the machine, it is necessary to avoid foreign objects other than tobacco entering the squeezing chamber to avoid causing danger and machine damage.

It is recommended to clean the nozzle and extrusion chamber after each use or regularly. Tobacco will inevitably leave behind tar powder during the injection process. Long term accumulation may lead to machine jams. When cleaning live models of machines, the machine power should be turned off to avoid accidentally touching the switch, which may cause danger or damage to the machine.

HK-1|Cleaning Guidelines